Frequently Asked Questions
Our Premium offering of tape from tagra uses superior chip developed with a high color rendering and has a lower decay rate. It also comes with a 5 year warranty. In addition to this our premium tape has the most sticky double sided tape on the back which sticks to almost any surface and reduces the chances of falling off.
Premium tapes are better for long term installations and demanding commercial environments where colour rendering and long lasting brightness is essential.
Standard tapes provide a great amount of performance for less cost
There are a few ways you can do this. Remember you will still have 10-15cm of live cable at one end of the led tape roll that you purchased, with which you can connect to a driver using U2.1FEM or hard wire into the terminals of a Driver (See further down the page).
If you do not have any wires to work with you can either choose a connection cable, which involves a push on connector that the LED tape slides in to OR you can solder a cable directly onto the copper dots (to be performed by qualified electricians).
To choose your connection cable you will need to match the tape width with the connector. If you have an 8mm width tape, you will need an 8mm width connector. The same applies to each tape.
The tape width is written on our product descriptions.